Mastercard

High Density DVI USB KVM Switch 16 Port

The UNIMUX™ High Density DVI USB KVM switch allows you to control up to 16 single link DVI USB computers with one DVI-D monitor, USB keyboard and USB mouse.

Features:

Incorporates NTI's patented true autoboot USB switching; all attached USB PCs, SUNs and MACs can be booted simultaneously.
Supports video resolutions up to 1920x1200.
Supports digital DVI for crisp and clear video quality on flat panel display.
Control the switch through the front panel interface, keyboard commands or RS232.
High quality, rugged steel construction with durable powder coat finish.
Fully compliant with USB 1.1 standards.
USB SUN start-up keys are supported.
Supports MAC soft (keyboard) power-on.
SUN extra keys are emulated on keyboards with Windows layouts.
1RU case is standard. Includes rackmount kit.
Cabling runs are simplified with NTI's high density KVM switch cables.

Includes:

1 x High Density DVI USB KVM Switch 16 Port

Typical Use:

typicle use of High Density DVI USB KVM Switch 16 Port

Specification:

Hosts

Female HDMI-A connectors.
Supports USB computers (PC, SUN, MAC) with DVI video.
Multiplatform support: Solaris, Linux, FreeBSD and MAC OS 9/10, Windows 2000/XP/Vista/Server 2000/2003/2008.

Monitor

Supports crisp and clear video resolutions up to 1920x1200.
One female DVI-I connector.
Single link DVI-D signal.
DDC2B compatible.

Devices

Two female USB Type A connectors.
Compatible with most USB keyboards and mice, including USB IntelliMouse^®.
Keyboard and mouse are hot-pluggable.
Supports SUN and MAC extra keys.

Power

110 or 220 VAC at 50 or 60 Hz via IEC connector.
Power consumption: 10W

Dimensions

WxDxH(mm)
- 386x152x45 (without supplied rackmount kit)
- 483x152x45 (with supplied rackmount kit)

Cables

Interface cables between your computers and the switch are required for proper operation. Use USB-DHEXT-xx-MM to connect the computers to the switch.
Cables not included.

Environmental

Operating temperature: 0°C to 38°C (32°F to 100°F).
Storage temperature: -30°C to 60°C (-20°F to 140°F).
Operating and Storage Relative Humidity: 17 to 90% non-condensing RH.

Regulatory Approval

CE, RoHS

Warranty

Two years

Control Methods

Front Panel Interface

LEDs indicate currently selected port and mode of operation.
Hold in any button for more than five seconds to go into Scan, Broadcast or Command Mode.
- In Normal Operating Mode, the user can directly operate the selected computer with transparent presence of the NTI switch.
- Scan Mode automatically and sequentially displays the video from each powered on computer for 2-255 seconds.
- Broadcast Mode allows the user's keystrokes to be sent to both powered on computers. (Broadcast Mode is not available for MACs.)
- Command Mode allows the user to give instructions to the switch through his/her keyboard. Keystrokes are not passed to the computer.

Keyboard

Scan, Broadcast or Command Modes are available from the keyboard using hot keys.
Use the keyboard to command the switch box to select ports or configure the Scan delay.
Type <Ctrl>+<`> (or <Compose>+<`>) to go into Command Mode.
Press <Esc> to leave Command Mode and return to Normal or Scan Mode.

RS232 Control

Female RJ45 connector.
Baud rate 2400, 9600, 19200, or 38400.
Use DIP switches to set the baud rate and address up to 16 units, all of which can be daisy chained and controlled by one serial port.
1.5 meter CAT5e patch cable, RJ45F-DB9F and RJ45F-DB25F adapters included.
Download RS232 protocol manual

Commands

RS - causes switch to reset so that IN1 connects to OUT1, IN2 connects to OUT2.
CS - causes one INx/OUTx connection to occur.
CA - causes all inputs to connect to specified output.
RO - reads what input is connected to specified output.
RU - reads size of matrix, reports number of inputs and number of outputs on specified switch.